Manual de uso SentrySafe MSW0809 Caja fuerte

Manual de uso

Instructions for floor mounting

This kit contains:

(2) lag screws, (2) washers, (2) masonry anchors (Fig. A)

Tools needed for floor mounting: Drill, wrench,

7

⁄

1

6

" (11.0 mm) drill bit, for wood anchoring:

9

⁄

3

2

" (7.2

mm) drill bit, for masonry anchoring:

3

⁄

8" (9.50 mm)

masonry drill bit.

Instructions:

1

. Tip the safe onto its right side. (Door hinges horizon-

tal with the floor.)

2. Unlock the safe and open the door.

3. Look on the bottom of the safe for two indentations

in opposite corners. Using the

7

⁄

1

6

" (11.0 mm) bit,

d

rill a hole through each indentation perpendicular

to the bottom of the safe. (Fig. B)

4. Close the door and tip the safe upright. Place it where

desired and reopen the door.

5. Use a screw or drill bit to mark the floor through both

holes. (Fig. C)

6. Move the safe aside to clear both marked spots for

drilling.

7. Drill into the floor:

A. For wood: Using the

9

⁄

32" (7.2 mm) bit, drill a hole

2

1

⁄

2" (64 mm) deep in each marked spot. (Fig. D)

B. For masonry:

Using the

3

⁄

8" (9.50 mm) masonry bit, drill a hole

2

1

⁄

2" (64 mm) deep in each marked spot. (Fig. D)

Install a masonry anchor in each hole.

8. Replace the safe in the desired position, with the

holes in the safe aligned with those in the floor.

9. Securing the safe:

A. For wood: Pass each lag screw through a washer,

then through the safe and into a hole. Tighten with

the wrench. (Fig. E)

B. For masonry: Pass each lag screw through a

washer, then through the safe and into a masonry

anchor. Tighten with the wrench. (Fig. F)

NOTE: Drill holes through feet only, not through

the back or sides.

NOTE: Bolting/unbolting of the unit is at the

consumers expense and discretion. Sentry Group

is not responsible for any costs incurred if the

unit is to be replaced.

Lost combination or keys

IMPORTANT: Please read the following instructions

carefully. For your protection, new keys CAN, and

combinations CANNOT, be issued by telephone

request. To order replacement keys and/or

combinations, it is essential that you e-mail or fax

t

o the Sentry Customer Service at the appropriate

contact address or number on the back cover. If you

need assistance in preparing your order, or wish to

purchase via credit card (Visa/Mastercard only),

please call Sentry Customer Service at the

appropriate contact number on the back cover.

Lost combination: First, find your safe’s Model and

Serial Number, then call your local Sentry retailer. The

Serial Number is on the back cover, and is also printed

on the small label beside the door hinge (outside).

Lost keys: To obtain replacement keys, please contact

your local Sentry retailer with the safe Serial Number.

The Serial Number is on the back cover, and is also

printed on the small label beside the door hinge (out-

side).

WARNING

DO NOT store delicate items directly in your safe.

SentrySafe products which offer fire protection have a

patented insulation that has a high moisture content. In

addition the SentrySafe advanced safes close airtight to

offer water resistance, which may also cause moisture to

accumulate inside your safe. The desiccant packet

included in your safe during shipment, should be left in

your safe. DO NOT DISCARD IT.

It is intended to help

absorb moisture which may accumulate inside your safe.

Please open your unit periodically to avoid moisture

accumulation.

If you choose to store delicate items such as jewelry with

working parts, watches, stamps, or photos in your safe,

we recommend putting them in an air-tight container,

prior to placing them in the safe for storage.

NOTE: Sentry Group will not be responsible for any

damage or loss of items placed in the unit due

to moisture.

WARNING

DO NOT store pearls in this safe unit.

In the event of a fire, potential damage to delicate pearls

occurs at temperatures much lower than the 350°F inte-

rior performance measure which the UL classification

performance standard indicated guarantees. Therefore,

DO NOT store pearls in your SentrySafe product.

WARNING

Nocomputerdisks,audio-visualmediaor

photonegatives.

T

his product in not intended to protect computer floppy

or 2-1/4” diskettes, cartridges and tapes, audio or video

cassettes or photo negatives. For fire-resistant storage

of these materials, ask your retailer for the SentrySafe

Fire-Safe Media storage products.

IMPORTANT

Using a mechanical combination lock

NOTE: It may be required to push the bolt button which,

in turn, will throw the bolts to a locked position while

t

he door is open (Fig. G). Proceed to test your combina-

tion. The handle should be all the way UP, in the

horizontal position before attempting to dial out

safe. Your combina tion lock is now ready to use. You

will find your safe’s combina tion on the sticker on the

back of the owner’s manual. Depending upon the model

you chose, you will have either a 3-number or 4-number

combination.

Dual security combination

and key lock safes

For added security, some safes have a dual locking

system. Combination and

key are required to unlock dual

locking system locks. NOTE: The safe will lock with

or without key.

To unlock and open

Insert the key in the lock and turn until the plunger pops

out. Remove key.

Open first – test combination

with door open!

3-NUMBER COMBINATION

See back cover of this manual for your combination.

NOTE: This combination cannot be changed.

Start at zero.

Turn dial right past ZERO 3 rotations. Stop

at the first number of your combination

after third rotation.

Turn the dial to left 2 rotations. Stop at

second number on second rotation.

Turn dial to the right. Stop at third number

on first rotation.

ENGLISH

3

A B

DC

E F

G

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus SentrySafe MSW0809 Caja fuerte. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con SentrySafe. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu SentrySafe MSW0809 Caja fuerte en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para SentrySafe Cajas fuertes
Más manuales de Cajas fuertes

Preguntas frecuentes sobre SentrySafe MSW0809 Caja fuerte

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

SentrySafe SFW123CU Caja fuerte

Manual de uso

SentrySafe SFW123GTF Caja fuerte

Manual de uso

SentrySafe QAP1E Caja fuerte

Manual de uso

SentrySafe SFW123GDF Caja fuerte

Manual de uso

SentrySafe X105P Caja fuerte

Manual de uso

SentrySafe CHW20205 Caja fuerte

Manual de uso

SentrySafe FPW082HTC Caja fuerte

Manual de uso

SentrySafe SF123CS Caja fuerte

Categorias relacionadas