Manual de uso SentrySafe OA3807 Caja fuerte

Manual de uso

1-English

Gain entry with the combination lock

Opening your safe for the fi rst time (keep door open during setup):

1

The handle should be all of the way UP, in

the horizontal position before attempting

to dial out safe.

Testing your combination: Your safe’s combina-

tion is printed on the front of this owner’s manual.

You will have a 3-number or 4-number combination

depending upon the model purchased.

3-NUMBER COMBINATION

(Cannot be changed)

1. To unlock and open

Before dialing your combination, simply insert the

key (if equipped) in the lock and turn until the

plunger pops out. Remove key.

NOTE: The safe will lock if key lock cylinder is

pressed in with or without key.

A. Start the dial at zero.

B.

Turn the dial to the left. Make sure ZERO

passes the pointer at least THREE times. Then stop

at the first number of your combination.

C.

Turn the dial to the right. Stop the

SECOND time you reach the second number of

your combination.

D.

Turn the dial to the left. Stop the FIRST

time the pointer reaches the third number of your

combination.

2. To close and lock

You can relock the safe in two ways. With the

door closed, depress the key lock (if equipped)

with your finger, or spin the combination dial one

full turn. For greatest security, do both. (Make

sure the door handle is in the horizontal position.)

4-NUMBER COMBINATION

(Cannot be changed)

1. To unlock and open

Before dialing your combination, simply insert the

key (if equipped) in the lock and turn until the

plunger pops out. Remove key.

A. Point the dial to zero.

B.

Turn the dial to the left. Make sure ZERO

passes the pointer at least FOUR times. Then stop

at the first number of your combination.

C.

Turn the dial to the right. Stop the THIRD

time you reach the second number of your

combination.

D.

Turn the dial to the left. Stop the SECOND

time you reach the combination’s third number.

E.

Turn the dial to the right. Stop the FIRST

time you reach the last number of your

combination.

2. To close and lock

You can relock the safe in two ways. With the

door closed, depress the key lock (if equipped)

with your finger, or spin the combination dial

one full turn. For greatest security, do both.

(Make sure the door handle is in the horizontal

position.)

Congratulations on your purchase of a Sentry

®

Safe product. SentrySafe is the world’s leader in

fi re/water-resistant and security storage. This guide describes how to easily set up your safe.

2

Gain entry with the basic electronic lock

The handle should be all of the way UP, in

the horizontal position before attempting

to open safe.

Opening your safe for the fi rst time (keep

door open during setup):

1. Remove and discard the screw (if

equipped) at the base of the lock case.

2. Turn the electronic lock case to the

right (clockwise), from 12 o’clock to

2 o’clock, and remove.

• Insert 4 new AA batteries (not included) to power

this lock.

• Replace the electronic lock case and turn to the

left (to 12 o’clock) to reassemble.

NOTE: The yellow LED will light when the batteries

need to be replaced.

3. Turn the key (if your safe is equipped with a key

lock) to the right so the lock cylinder pops out.

4. Enter the factory code (printed on the fi rst page

of this guide). When the green light appears, you

have four seconds to turn the handle down to

open. Try this several times before proceeding to

the next step.

To unlock safe:

Enter the 5-digit factory code, a pre-programmed

user code, or a pre-programmed user pin

(programming instructions to follow). When the

green LED lights you have 4 seconds to turn the

handle and open the safe.

To lock safe:

Close the door and return the handle to the

horizontal position. For greatest security, depress

the key lock (if equipped) with your fi nger.

NOTE: If your unit is equipped with a water-

resistant gasket additional pressure to the left

corner of the door may be required before the

handle can be returned to the horizontal position.

Access codes

There are 3 possible ways to unlock and access

the safe:

1. Factory code

(Found on the fi rst page of this guide) You can

always open the safe by entering the pre-set 5-digit

factory code. This code cannot be deleted.

2. User code

If you prefer to employ your own code, you can

program the safe to open using a 5-digit user code

of your choice.

3. User pin

If you wish to give someone else temporary access

to the safe, you can program a 5-digit user pin that

can later be erased.

Programming the user code

NOTE: One (1) user code is allowed.

To add:

1. Press the Prog key , then enter the 5-digit

factory code.

2. Enter the 5-digit user code of your choice.

To delete:

1. Press the Prog key.

2. Enter the 5-digit factory code twice.

Programming user pin

NOTE: One (1) user pin is allowed.

To add:

1. Press the Prog key 2 times.

2. Enter your 5-digit user code.

3. Enter the 5-digit user pin of your choice.

To delete:

1. Press the Prog key 2 times.

2. Enter your 5-digit user code.

3. Enter 0, 0, 0, 0, 0.

NOTE: If your safe does not appear to be working,

please check batteries before calling Sentry

Customer Care.

1

2

Getting started

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus SentrySafe OA3807 Caja fuerte. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con SentrySafe. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu SentrySafe OA3807 Caja fuerte en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para SentrySafe Cajas fuertes
Más manuales de Cajas fuertes

Preguntas frecuentes sobre SentrySafe OA3807 Caja fuerte

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

SentrySafe PP1K Caja fuerte

Manual de uso

SentrySafe FP082C Caja fuerte

Manual de uso

SentrySafe SFW082DTB Caja fuerte

Manual de uso

SentrySafe SFW205BXC Caja fuerte

Manual de uso

SentrySafe SFW205DPB Caja fuerte

Manual de uso

SentrySafe QAP2BLX Caja fuerte

Manual de uso

SentrySafe S0407 Caja fuerte

Manual de uso

SentrySafe S8371 Caja fuerte

Categorias relacionadas