Manual de uso Wagner F300 Furno Decapador por aire caliente

Manual de uso

FURNO 300

3

EN

To reduce the risks of re or explosion, electrical shock and the

injury to persons, read and understand all instructions included in

this manual. Be familiar with the controls and proper usage of the

equipment.

Indicates a hazardous situation which, if not avoided, could

result in death or serious injury.

HAZARD: POISON

Extreme care should be taken when stripping paint. The peelings,

residue and vapours of paint may contain lead, which is poisonous.

Any paint applied to homes before 1950 is likely to contain lead.

Any paint manufactured before 1977 may contain lead. Once the

paint is deposited on surfaces, hand-to-mouth contact can result in

the ingestion of lead. Exposure to even low levels of lead can cause

irreversible brain and nervous system damage. Young and unborn

children are particularly vulnerable to lead poisoning.

Before beginning any paint removal process you should determine

whether the paint you are removing contains lead. This can be done

by your local health department or by a professional who uses a paint

analyzer to check the lead content of the paint to be removed. Lead-

based paint should only be removed by a professional and should not

be removed using a Heat Gun.

PREVENTION:

Move the work piece outdoors, sheltered from rain. If this is not

possible, keep the work area well-ventilated. Open the windows and

put an exhaust fan in one of them. Be sure the fan is moving the air from

inside to outside.

• Remove or cover any carpets, rugs, furniture, clothing, cooking

utensils and air ducts.

• Place drop cloths in the work area to catch any paint chips or

peelings. Wear protective clothing such as extra work shirts, overalls

and hats.

• Work in one room at a time. Furnishings should be removed or

placed in the centre of the room and covered. Work areas should

be sealed o from the rest of the dwelling by sealing doorways with

drop cloths.

• Wear an approved dust respirator mask or a dual lter respirator

mask for dust and fumes. These masks and replaceable lters are

readily available at major hardware stores. Be sure that the mask

ts properly. Beards and facial hair may keep masks from sealing

properly. Change the lters often. Disposable paper masks are not

adequate.

• Use caution when operating the Heat Gun. Keep the Heat Gun

moving as excessive heat will generate fumes which can be inhaled

by the operator.

• Keep food and drink out of the work area. Wash hands, arms and face

and rinse mouth before eating or drinking. Do not smoke or chew

gum or tobacco in the work area.

• Clean up all removed paint and dust by wet mopping the oors.

Use a wet cloth to clean all walls, sills and any other surface where

paint dust is clinging. Do not sweep, dry dust or vacuum. Use a high

phosphate detergent of trisodium phosphate (TSP) to wash and mop

areas.

• At the end of each work session, put the paint chips and debris in

a double plastic bag, close it with tape or twist ties and dispose of

properly.

• Remove protective clothing and work shoes in the work area to

avoid carrying dust into the rest of the building. Wash work clothes

separately. Wipe shoes o with a wet rag and then wash it with the

work clothes. Wash hair and body thoroughly with soap and water.

Important Safety Information • Read all safety information before operating the equipment.

Save these instructions

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Wagner F300 Furno Decapador por aire caliente. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Wagner. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Wagner F300 Furno Decapador por aire caliente en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Wagner Decapadores por aire caliente
Más manuales de Decapadores por aire caliente

Preguntas frecuentes sobre Wagner F300 Furno Decapador por aire caliente

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Wagner F750 Furno Decapador por aire caliente

Manual de uso

Wagner HT775 Decapador por aire caliente

Manual de uso

Wagner HT1000 Decapador por aire caliente

Manual de uso

Wagner HT3500 Decapador por aire caliente

Manual de uso

Wagner F700 Furno Decapador por aire caliente

Manual de uso

Wagner F500 Furno Decapador por aire caliente

Manual de uso

Wagner HT770 Decapador por aire caliente

Manual de uso

Hikoki RH 600T Decapador por aire caliente

Categorias relacionadas