Manual de uso Wagner F700 Furno Decapador por aire caliente

Manual de uso

FURNO 700 · FURNO 750

4

EN

HAZARD: EXPLOSION OR FIRE

This Heat Gun produces extremely high temperatures (as high as

630°C). It must be used with caution to prevent combustible material

from igniting.

PREVENTION:

• Keep the Heat Gun in constant motion. Do not stop or dwell in one

spot.

• Use extreme caution if the

other side of the material

being scraped is inaccessible,

such as house siding. The

hidden side could catch on

re if it becomes too hot.

Some buildings contain highly

ammable materials behind

siding walls, oors, facia, sot

boards and other panels.

Check these areas before applying heat and do not use a heat tool if

ammable materials are present or if you are unsure of the hidden

material.

• Do not use near surfaces with cracks or near metal pipes or ashing.

Heat may be conducted behind the work surface and ignite hidden

material. The ignition of hidden materials may not be readily

apparent and can result in property damage and injury.

• Do not use electric tools in the presence of ammable liquids or

gases.

• Do not use near combustible materials such as dry grass, leaves, and

paper which can scorch and catch re.

• The nozzle becomes very hot. Do not lay the Heat Gun on ammable

surfaces when operating the gun or immediately after switching the

gun o. Always set the gun on a at, level surface so that the nozzle

tip is directed upwards and away from the supporting surface.

• Do not touch the nozzle until the tool has cooled.

• Do not use the Heat Gun as a hair dryer.

• Tools and paint scrapings become very hot. To avoid burns, use work

gloves and eye protection when scraping.

• Always treat the Heat Gun with the same respect as an open ame.

• Do not use in presence of an explosive atmosphere.

HAZARD: ELECTRIC

May cause property damage, severe injury or loss of life.

PREVENTION:

• Do not disassemble the Heat Gun.

• Do not work in wet areas or expose the Heat Gun to rain or moisture.

• Guard against electric shock by preventing body contact with

grounded surfaces such as pipes, radiators, ranges, aluminium

ladders or other grounded devices.

• Do not abuse the cordset. Never carry the Heat Gun by the cordset or

yank on the cordset to disconnect it from the power supply. Keep the

cordset away from heat, oil and sharp edges. Inspect the cordset for

wear or damage regularly.

• If an extension cord is damaged or otherwise unsuitable for use,

replace it with a new extension cord.

HAZARD: GENERAL

May cause property damage or severe injury.

PREVENTION:

• Always disconnect the Heat Gun from the power supply when not in

use. Store indoors in a dry place and out of the reach of unsupervised

children.

• Keep your work area well lit and clean.

• Do not overreach, especially when working on ladders. Keep proper

footing and balance at all times. Be certain any ladders being used are

sturdy, stable, on rm ground and erected at safe working angles.

• Avoid power lines.

• Keep moveable items secured and steady while scraping.

• Always use protective eyewear when working.

• Stay alert and use common sense when operating any tool.

• Never use to thaw frozen pipes located inside walls or near

combustibles. Always use reector nozzle (P/N2366225) to thaw

frozen pipes.

Facia

Soffit

Inside

Wall

Siding

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Wagner F700 Furno Decapador por aire caliente. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Wagner. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Wagner F700 Furno Decapador por aire caliente en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Wagner Decapadores por aire caliente
Más manuales de Decapadores por aire caliente

Preguntas frecuentes sobre Wagner F700 Furno Decapador por aire caliente

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Wagner HT775 Decapador por aire caliente

Manual de uso

Wagner F500 Furno Decapador por aire caliente

Manual de uso

Wagner HT3500 Decapador por aire caliente

Manual de uso

Wagner F750 Furno Decapador por aire caliente

Manual de uso

Wagner HT770 Decapador por aire caliente

Manual de uso

Wagner F300 Furno Decapador por aire caliente

Manual de uso

Wagner HT1000 Decapador por aire caliente

Manual de uso

Stayer DX 1800 B Decapador por aire caliente

Categorias relacionadas