Manual de uso Westinghouse 6340300 Lámpara
¿Necesita un manual para su Westinghouse 6340300 Lámpara? A continuación puedes ver y descargar el manual en PDF gratis en español. Este producto actualmente tiene 7 preguntas frecuentes, 0 comentarios y tiene 0 votos. Si este no es el manual que desea, , contáctenos.
¿Su producto tiene algún defecto y el manual no ofrece ninguna solución? Vaya a Repair Café para solicitar un servicio de reparación gratuito.
Manual de uso
Loading…
Westinghouse Lighting, Philadelphia, PA 19154-1029, U.S.A. www.westinghouselighting.com
, WESTINGHOUSE, and INNOVATION YOU CAN BE SURE OF are trademarks of Westinghouse Electric Corporation.
Used under license by Westinghouse Lighting. All rights reserved. Made in China
W-437
072815
WARRANTY INFORMATION
This Westinghouse Lighting Fixture is warranted against defects in material and workmanship for a
period of Five Years from purchase date. This warranty is in lieu of all other warranties expressed or
implied.
This warranty does not cover acts of nature such as lightning damage, or corrosion and discoloration
of components, nor does it cover damages caused through abuse, improper installation, surges in
electric current, or acts of third parties.
This warranty does not cover costs of removing and re-installing the lighting fixture.
If this product fails for any reason covered by this warranty, contact us toll free at 1-888-417-6222.
ASSEMBLY INSTRUCTIONS FOR INDOOR LIGHTING FIXTURE
Congratulations on your Westinghouse purchase. This fixture has been designed to give you many
years of beauty and service. For questions and comments, please visit www.westinghouselighting.
com/contact-us.
NOTE: Carefully unpack fixture and parts. Make sure all parts are included before discarding any pack-
ing materials (see figure 1).
WARNING:
ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY.
Read and follow instructions exactly as shown. If instructions are unclear, do not proceed.
Contact a qualified electrician. Read all instructions before beginning. Proper wiring is essen-
tial for safe operation of this fixture. When cutting or drilling into walls or ceilings, do not dam-
age electrical wiring, gas lines, or water lines. If any of the fixture or wiring components are
damaged, do not install fixture. Return to place of purchase.
For fixtures provided with 75° C or 90° C supply wire warning only. (These warnings are pro-
vided on the U.L. label and on the fixture carton.) Risk of fire. Most dwellings built before 1985
have supply wires rated 60° C. Consult a qualified electrician before installing.
NOTE: For fixture employing a grounded convenience outlet. This fixture employs a grounded
type receptacle and is not intended for connection to a two wire ungrounded source of supply.
Owner’s Manual
Indoor Lighting Fixture
Installation Instructions
WARNING
Turn off electricity to the mounting site before beginning installation.
Mounting instructions must be followed exactly as shown for the fixture to be safely
supported.
CLEANING AND CARE
To clean, wipe fixture with soft cloth. Clean glass with mild soap. Spray from chemical cleaners can
discolor the finish of fixture. Do not use scouring pads, powders, steel wool or abrasive paper to
clean this fixture.
NOTE FOR FIXTURES THAT ARE SOLID BRASS:
Your hand-crafted, solid brass lighting fixture has been coated with a durable, baked-on acrylic
lacquer which gives maximum protection against the weather. However, in time the brightness of
the brass will tarnish, giving way to an authentic old-world brass finish. To keep your solid brass
fixture looking new for years to come, regularly apply a good quality, non-abrasive car wax to all
metal surfaces, giving the fixture an extra protective covering.
ORDERING PARTS
Keep this manual for future reference, and in case replacement parts are needed. Available parts can
be ordered from place of purchase. Use exact wording from diagrams when ordering parts.
FIGURE 2.
FIXTURE
WIRES:
Smooth
HOUSE
WIRES:
Black
(Hot)
HOUSE
WIRES:
White
(Neutral)
HOUSE
WIRES:
Bare
Copper
(Ground)
FIXTURE
WIRES:
Bare
Copper
(Ground)
FIXTURE
WIRES:
Ribbed
FIGURE 3.
PENDANT MOUNTING AND WIRING INSTRUCTIONS
NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures
meet all UL specifications.
1.
Turn off power at circuit box to avoid possible electric shock.
2. Secure mounting bar (A) to outlet box (B) with outlet box screws (C) (
if applicable
) (see fig. 1).
3. Thread hex nut 1 (D1) onto mounting nipple (E) approximately 1/4 inch and insert lock washer (F),
then thread mounting nipple (E) onto mounting bar (A) and secure hex nut 1(D1).
4. Thread fixture loop (G) onto nipple (U) of fixture.
NOTE: Do not twist or kink wires when sliding fixture loop (G) downward.
5. Open one link on bottom end of chain (J). Attach to fixture loop (G). Securely close link on chain (J).
6. Thread screw collar ring (K) onto screw collar (L), then place canopy (M) over top of screw collar (L).
7. Lace wires up through every other link on chain (J) then through screw collar (L), canopy (M), and
mounting nipple (E).
8. O
pen one link on top end of chain (J). Attach to loop on screw collar (L). Securely close link on chain (J).
9. Identify color coding of fixture wires (see fig. 3).
10. Connect the smooth wire with marking printed or molded from the fixture with the black wire from
outlet (B) box
by wire connector (N), and wrap the wire connector (N) with electrical tape for a
more secure connection.
11. Connect the ribbed wire from the fixture with the white wire from the outlet box (B)
by wire
connector (N), and wrap the wire connector (N) with electrical tape for a more secure connection.
12. Partially thread green grounding screw (O) into side hole (P) on mounting bar (A) (see fig. 1).
13.
Wrap grounding wire from fixture around green grounding screw stem (O) leaving enough excess
wire, then connect the excess grounding wire from the fixture with the grounding wire from outlet
box (B) by wire connector (N) (if applicable), then wrap the wire connector (N) with electrical tape
for a more secure connection.
14. Tighten green grounding screw (O). Do not over tighten.
15. Remove screw collar ring (K) from screw collar (L) and secure screw collar (L) to mounting nipple (E).
16. Tuck wires inside outlet box (B).
17. Raise canopy (M) to ceiling and secure screw collar ring (K) to screw collar (L).
FIXTURE ASSEMBLY INSTRUCTIONS
Warning: This fixture is for indoor use only.
1. Spread fixture arms (W). (if applicable)
2. Thread nipple (K) into coupling (H).
3. Slide flat washer 1 (I1) and rubber washer 1 (Q1) over nipple (K). Raise glass (T) up to nipple (K)
protruding through opening in glass (T).
4. Carefully support glass (T) while securing rubber washer 2 (Q2) and flat washer 2 (I2), hex nut 2
(D2), decorative cap (R), and finial (S) to nipple (K).
5. Turn power back on at circuit box.
SEMI-FLUSH MOUNTING AND WIRING INSTRUCTIONS
NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures
meet all UL specifications.
1. Turn off power at circuit box to avoid possible electric shock.
2. Thread mounting screws (A) into mounting bar (B) approximately 1/4 inch (see fig. 1).
3. Secure mounting bar (B) to outlet box (C) with outlet box screws (D) (if applicable).
4. Remove the loop from canopy (F).
5. Remove cap nut (Q) from the canopy (F) for future use.
6. Identify color coding of fixture wires (see fig. 3).
7. Connect the smooth wire with marking printed or molded from the fixture with the black wire from
outlet (B) box
by wire connector (N), and wrap the wire connector (N) with electrical tape for a
more secure connection.
8. Connect the ribbed wire from the fixture with the white wire from the outlet box (B)
by wire
connector (N), and wrap the wire connector (N) with electrical tape for a more secure connection.
9. Partially thread green grounding screw (K) into side hole (L) on mounting bar (B) (see fig. 1).
10.
Wrap grounding wire from fixture around green grounding screw stem (O) leaving enough excess
wire, then connect the excess grounding wire from the fixture with the grounding wire from outlet
box (B) by wire connector (N) (if applicable), then wrap the wire connector (N) with electrical tape
for a more secure connection.
11. Tighten green grounding screw (K). Do not over tighten.
12. Tuck wires inside outlet box (C).
FIXTURE ASSEMBLY INSTRUCTIONS
Warning: This fixture is for indoor use only.
1. Spread fixture arms (W). (if applicable)
2. Raise canopy (F) to ceiling allowing mounting screws (A) to protrude through openings in canopy
(F) and secure with cap nuts (Q).
3. Thread nipple (K) into coupling (H).
4. Slide flat washer 1 (I1) and rubber washer 1 (Q1) over nipple (K). Raise glass (T) up to nipple (K)
protruding through opening in glass (T).
5. Carefully support glass (T) while securing rubber washer 2 (Q2) and flat washer 2 (I2), hex nut 2
(D2), decorative cap (R), and finial (S) to nipple (K).
6. Turn power back on at circuit box.
FIGURE 1. For Pendant Mounting Option
LAMP
DECORATIVE
CAP (R)
FINIAL (S)
HEX NUT 2 (D2)
FLAT WASHER 2 (I2)
FLAT WASHER 1 (I1)
RUBBER WASHER 2 (Q2)
RUBBER WASHER 1 (Q1)
GROUND
WIRE
*NOT SUPPLIED
Line art shown may not exactly match the
fixture enclosed. However, the installation
instructions do apply to this fixture.
SIDE
HOLE (P)
WIRE
CONNECTORS (N)
OUTLET BOX SCREWS (C)
LOCK WASHER (F)
HEX NUT 1 (D1)
MOUNTING NIPPLE (E)
SCREW
COLLAR (L)
CANOPY (M)
CHAIN (J)
NIPPLE (U)
SCREW COLLAR
RING (K)
FIXTURE LOOP (G)
FIXTURE
ARM (W)
MOUNTING
BAR (A)
*OUTLET
BOX (B)
GREEN GROUNDING
SCREW (O)
GLASS (T)
COUPLING (H)
NIPPLE (K)
*NOT SUPPLIED
Line art shown may not exactly match the
fixture enclosed. However, the installation
instructions do apply to this fixture.
FIGURE 2.
GROUND
WIRE
LAMP
WIRE
CONNECTORS (N)
SIDE HOLE (P)
GREEN
GROUNDING
SCREW (O)
CAP NUTS (Q)
CANOPY (F)
CROSS
BAR (B)
MOUNTING
SCREWS (A)
OUTLET BOX
SCREWS (D)
DECORATIVE
CAP (R)
FINIAL (S)
HEX NUT 2 (D2)
FLAT WASHER 2 (I2)
FLAT WASHER 1 (I1)
RUBBER WASHER 2 (Q2)
RUBBER WASHER 1 (Q1)
FIXTURE
ARM (W)
GLASS (T)
COUPLING (H)
NIPPLE (K)
For Semi-flush Mounting Option
*OUTLET
BOX (C)
Loading…
Puntuación
Dé su opinión de la Westinghouse 6340300 Lámpara calificando el producto. ¿Quiere compartir su experiencia con este producto o hacer una pregunta? Deje un comentario en la parte inferior de la página.Más sobre este manual
Entendemos que es bueno tener un manual en papel para tus Westinghouse 6340300 Lámpara. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Westinghouse. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Westinghouse 6340300 Lámpara en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.
Especificaciones
| Marca | Westinghouse |
| Modelo | 6340300 |
| Categoría | Lámparas |
| Tipo de archivo | |
| Tamaño del archivo | 1.45 MB |
Todos los manuales para Westinghouse Lámparas
Más manuales de Lámparas
Preguntas frecuentes sobre Westinghouse 6340300 Lámpara
Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.
¿Es regulable toda la iluminación led? Verificado
No, no todas las bombillas led son regulables. Esto se indica en el embalaje o en la propia bombilla.
Ha sido de gran ayuda (508) Leer másPuse una nueva luz en mi lámpara pero no se enciende, ¿por qué? Verificado
Algunas lámparas están hechas para fuentes de luz de un vataje específico. Cuando se inserta una fuente de luz que requiere una potencia superior a la que puede proporcionar la lámpara, es posible que la luz no se encienda. Si la lámpara entrega un vataje mucho más alto de lo que está hecha la fuente de luz, la fuente de luz puede quemarse.
Ha sido de gran ayuda (371) Leer más¿Qué significa lumen? Verificado
Lumen es una unidad de medida para la cantidad total de luz visible emitida por una fuente.
Ha sido de gran ayuda (236) Leer más¿Cuáles son las bases de tornillo que existen? Verificado
Hay muchos tipos de bases de tornillo en el mundo, pero la mayor parte está basada en la rosca Edison, indicada por la letra E. En la mayor parte de los países las bases de tornillo E27 y E14 son las más comunes. En los Estados Unidos las E26, E17, E12 y E10 son estándar.
Ha sido de gran ayuda (180) Leer más¿Qué dicen los vatios acerca de mi lámpara? Verificado
El vatio es una unidad de medida para el consumo de electricidad. Las lámparas que emiten más luz suelen consumir más vatios, pero para comparar la potencia luminosa siempre debe usar los lúmenes.
Ha sido de gran ayuda (155) Leer más¿Qué significa led? Verificado
Led significa diodo emisor de luz. Al guiar la electricidad en la dirección correcta a través de un semiconductor, se emite la luz.
Ha sido de gran ayuda (139) Leer más
Únase a la conversación sobre este producto
Aquí puedes compartir lo que piensas sobre Westinghouse 6340300 Lámpara. Si tiene alguna pregunta, primero lea atentamente el manual. Puede solicitar un manual utilizando nuestro formulario de contacto.