Manual de uso Winix T810 Purificador de aire
¿Necesita un manual para su Winix T810 Purificador de aire? A continuación puedes ver y descargar el manual en PDF gratis en español. Este producto actualmente tiene 1 pregunta frecuente, 0 comentarios y tiene 0 votos. Si este no es el manual que desea, , contáctenos.
¿Su producto tiene algún defecto y el manual no ofrece ninguna solución? Vaya a Repair Café para solicitar un servicio de reparación gratuito.
Manual de uso
Loading…
WHERE TO USE
12~18 in
12~18 in
12~18 in
12~18 in
Allow 12 ~ 18 in. of space between TVs, radios, , humidifiers, and
other electronics
It can cause malfunction due to electromagnetic interference and
humidified water.
Place indoors away from direct sunlight
Direct exposure may cause product malfunction or failure.
Only place on hard, flat surfaces
Flimsy or slanted surfaces may result in abnormal noise and
vibrations.
Allow 12 ~ 18 in. from walls
For maximum air flow.
FRONT BACK
PACKAGE CONTENTS
Smart Sensor
Air Outlet Vent
Handle
Power Plug
Control Panel
Front Panel
Unit
360º All-in-One
True HEPA Filter
User
Manual
FRONT
PACKAGE CONTENTS
BACK
Control Panel
Air Outlet Vent
Handle
Smart Sensor
Power Plug
User
Manual
360º All-in-One
True HEPA Filter
Unit
Front Panel
MODEL PART DIAGRAM
02
05
13
03 03
01
06
07
04
09
08
14
10 11 12
15
01. Filter Life / Filter Reset Button
• A quick press will show the remaining filter life:
indicated on the front display (F99 ~ F00).
• A long press of 10 seconds will reset the filter life indicator.
- Use when replacing the filters.
- Filter Reset Button can be used when the power is turned off.
- The filter life will be reset to 100%.
02. Light Mode Button
Use the light button to set the desired display brightness. The
display brightness cycles in the order of 100%
70% 30%
OFF. Other features remain unchanged.
03. Fan Speed Indicator Buttons
Indicates the current fan speed.
• Use the Fan Speed arrow buttons to set the desired fan
speed. Fan speeds cycle over in this sequence:
Auto, Low, Mdium, High, Turbo.
04. Auto
Mode Button
The unit will default to Auto with PlasmaWave
®
enabled when
first powered on.
• Auto Mode automatically adjusts fan speeds according to
your indoor air quality. The fan speed will adjust to low when
air quality is good, medium when fair, and to high when poor.
05. Power Button
7XUQVWKHXQLWRQRURII'XULQJWKHILUVWbVHFRQGVRISRZHUWKH$LU
Quality Indicator will cycle through Blue, Green, Amber and Red colors.
• 6PDUW6HQVRUWDNHVDSSUR[LPDWHO\bVHFRQGVWRGHWHFWWKH
air quality in the environment before normal operation begins.
06. Light Sensor
Detects the amount of ambient light in the environment. When
in Auto Mode, the light sensor detects when to put the unit into
Sleep Mode.
07. Wi-Fi / Pairing Button
• A quick press will turn Wi-Fi on/off.
• A long press of 3 seconds will activate pairing mode.
• A Wi-Fi indicator will display on the front while Wi-Fi is active.
CONTROL PANEL
INITIAL OPERATION
1. Turn the product upside down.
2. Grab the handle at the bottom of the
product, turn counter-clockwise, and pull
out the filter cover.
3. Remove the protective vinyl from the filter
installed inside the product.
4. Install the filter top side down into the
bottom of unit until it is fully inserted. The
top of the filter shows the opening and the
bottom of the filter is solid.
5. After installing the filter, turn the handle
clockwise to close the filter cover.
6. Return the product to an upright position
and resume normal operation.
BOTTOM
When to Replace Filters
Filter Indicator Light When to Service When to Replace
360º All-in-One
True HEPA Filter
Check Filter
Clean once every 14 days
Lasts Approx. 12 months
• When the Check Filter indicator LED is on, it is time to replace the All-in-One True HEPA Filter.
• Intervals between filter replacement may vary depending on environment.
MAINTENANCE
R
1712-0118-00
FILTER
REPLACING FILTERS
Resetting Filter Life:
After replacing the 360º All-in-One True HEPA Filter, use a small object such as
D:KLOHWKHXQLWLVRQKROGWKH)LOWHU5HVHW%XWWRQIRUDWOHDVWbVHFRQGVXQWLO\RX
hear the beep. After the beep, the Filter Replacement Indicator will disappear.
CLEANING CARE
Cleaning the Filters:
Clean with a vacuum or a soft brush.
• Only clean the Pre-Filter.
• This filter CAN NOT be washed.
• Intervals between filter cleaning may vary
depending on the air quality.
Cleaning the Exterior & Interior:
Wipe with a soft damp cloth using room temperature
water. Afterwards, wipe it down with a clean dry cloth.
After turning the product upside down, remove the
filter cover and clean the interior with a vacuum
cleaner.
•For optimal performance, clean every 14 days.
NOTICE
• When cleaning the unit, always unplug the power cord
first and then wait until the unit has cooled down.
• Never disassemble, repair, or modify this unit yourself.
• Do not use flammable sprays or liquid detergents.
• Do not allow children to clean or maintain the unit.
• Before cleaning or maintaining, ensure unit is unplugged.
• Do not use benzene, alcohol, or other volatile fluids,
which may cause damage or discoloration.
How to disassemble and clean the smart sensor cover
1. Please use your finger to detach the cover of the
dust sensor.
2. Clean the lens and suction port of the dust sensor
with a cotton swab, and then use a dry cotton
swab to clean the dust sensor.
(Cleaning frequency: Once every two months)
3. Close the cover of the dust sensor until you hear
a clicking sound.
NOTICE
• Do not clean the sensor with volatile substances such
as water, alcohol, or acetone.
If not cleaned regularly, the performance of the dust
sensor may deteriorate.
08. Air Quality Indicator
Color coded LED light indicates one of four levels of Air Quality:
Red (poor), Amber (fair), Green (average) and Blue (good).
09. PlasmaWave
®
Button
Enables or disables PlasmaWave
®
When the unit is running, you may hear a chirping or
buzzing sound. The sound is from particles passing through
PlasmaWave
®
, it is normal and does not signify product failure.
Press the PlasmaWave
®
Technology button when the unit is on
to enable or disable this feature.
10. Mode Indicator
Indicates whether Auto & Fan Speed Mode is enabled or disabled.
Low Medium High Turbo
11. Sleep Mode Indicator
Indicates whether Sleep Mode is enabled or disabled.
12. Wi-Fi Indicator
Indicates whether Wi-Fi Mode is enabled or disabled.
13. PlasmaWave
®
Indicator
Indicates whether PlasmaWave
®
is enabled or disabled.
14. Filter Replacement Indicator
LED light indicates when it is time to change the filter.
15. Ultrafine Dust Density Indicator
• The LED Ultrafine Dust Density Indicator displays the quality
of air in your environment.
When the unit senses an air quality change, it automatically
adjusts the LED Indicator to display the respective air quality.
• LED Numeric Smart Sensor displays air quality measures
fine particles down to 2.5 microns.
UNIT SPECIFICATIONS
Model Name T810 Dimensions
11.3 in(W) x 11.3 in(D) x 20.4 in(H)
Power Voltage
AC 120 V / 60 Hz
Weight bOEV
Power Rate b:
Replacement
Filter
R
Verified Room Size bVTIW
The exterior, design, and product specifications may be changed without prior notice to improve product performance.
Contact Winix for product related inquiries and customer service
• Dedicated Call Center:
☎
(877) 699-4649
• Website: www.winixamerica.com
To expedite service, please specify the model name and number, the nature of the problem, your contact
information, and your address.
4-STAGE
AIR PURIFICATION
Air Purification means it
removes inanimate particles
The numerical pollution level value displayed may differ from the information provided by
official institutions depending on the indoor environment or the location of the product.
BLUE GREEN ORANGE RED
0 ~ 35 36 ~ 55 56 ~ 150
150 ~ or higher
*PM2.5
*XLGHWR)LQH'XVW&RQFHQWUDWLRQ8QLWƖJP
3
)
Activated Carbon Filter
Fine Mesh Pre-Filter
True HEPA Filter
PlasmaWave Technology
Technology
Activated Carbon Filter
True HEPA Filter
Fine Mesh Pre-Filter
Loading…
Puntuación
Dé su opinión de la Winix T810 Purificador de aire calificando el producto. ¿Quiere compartir su experiencia con este producto o hacer una pregunta? Deje un comentario en la parte inferior de la página.Más sobre este manual
Entendemos que es bueno tener un manual en papel para tus Winix T810 Purificador de aire. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Winix. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Winix T810 Purificador de aire en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.
Especificaciones
| Marca | Winix |
| Modelo | T810 |
| Categoría | Purificadores de aire |
| Tipo de archivo | |
| Tamaño del archivo | 14.44 MB |
Todos los manuales para Winix Purificadores de aire
Más manuales de Purificadores de aire
Preguntas frecuentes sobre Winix T810 Purificador de aire
Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.
¿Un purificador de aire también elimina el polvo regular del aire? Verificado
Sí, los purificadores de aire también eliminan el polvo del aire que, de otro modo, tendría que eliminarse quitando el polvo y limpiando. Depende del purificador de aire hasta qué tamaño de polvo se puede eliminar del aire.
Ha sido de gran ayuda (172) Leer más
Únase a la conversación sobre este producto
Aquí puedes compartir lo que piensas sobre Winix T810 Purificador de aire. Si tiene alguna pregunta, primero lea atentamente el manual. Puede solicitar un manual utilizando nuestro formulario de contacto.