Manual de uso Bosch GSR 12V-15 FC Atornillador taladrador

Manual de uso

English | 9

Cordless Drill/Driver GSR 12V-15 FC GFA 12-X GFA 12-B GFA 12-E GFA 12-W

Recommended re-

chargeable batteries

GBA 12V... – – – –

Recommended char-

gers

GAL 12...

GAX 18...

– – – –

A)

Measured at 20−25°C with rechargeable batteryGBA 12V 4.0Ah.

B) Depends on battery in use

C) Limited performance at temperatures <0°C

Fitting

u Remove the battery from the power tool before carry-

ing out work on the power tool (e.g. maintenance,

changing tool, etc.). The battery should also be re-

moved for transport and storage. There is risk of injury

from unintentionally pressing the on/off switch.

Charging the battery

u Use only the chargers listed in the technical data. Only

these chargers are matched to the lithium-ion battery of

your power tool.

Note: The battery is supplied partially charged. To ensure

full battery capacity, fully charge the battery in the charger

before using your power tool for the first time.

The lithium-ion battery can be charged at any time without

reducing its service life. Interrupting the charging process

does not damage the battery.

The lithium-ion battery is protected against deep discharge

by the "Electronic Cell Protection (ECP)". When the battery

is discharged, the power tool is switched off by means of a

protective circuit: The application tool no longer rotates.

u Do not continue to press the On/Off switch after the

power tool has automatically switched off. The battery

can be damaged.

Removing the battery (see figureA)

To remove the battery (5), press the release button (4) and

pull the battery downwards out of the power tool. Do not

use force to do this.

Changing the tool

Inserting the application tool (see figure B)

Insert the application tool all the way into the mounting (1).

Fitting the adapter (see figure C)

Remove the application tool.

Insert the adapter into the mounting (1). Turn the locking

ring (14) until it audibly engages.

Inserting the application tool into the adapter GFA 12-E,

GFA 12-X (see figure D)

Insert the application tool all the way into the mounting (1).

The application tool is held in the mounting by means of a

magnet.

GFA 12-B (see figure E)

Open the drill chuck adapter (11) by turning it in direction of

rotation  until the application tool can be inserted. Insert

the application tool.

Firmly tighten the sleeve of the drill chuck adapter (11) by

turning it by hand in direction of rotation . This will auto-

matically lock the drill chuck.

Turning the adapter (see figure F)

Pull the locked adapter approx. 5mm away from the power

tool. Turn the adapter to the required position and then let it

go.

Removing the adapter (see figure G)

Remove the application tool.

Unlock the adapter in the direction and pull it off the

mounting (1).

Dust/chip extraction

The dust from materials such as lead paint, some types of

wood, minerals and metal can be harmful to human health.

Touching or breathing in this dust can trigger allergic reac-

tions and/or cause respiratory illnesses in the user or in

people in the near vicinity.

Certain dusts, such as oak or beech dust, are classified as

carcinogenic, especially in conjunction with wood treatment

additives (chromate, wood preservative). Materials contain-

ing asbestos may only be machined by specialists.

– Use a dust extraction system that is suitable for the ma-

terial wherever possible.

– Provide good ventilation at the workplace.

– It is advisable to wear a P2 filter class breathing mask.

The regulations on the material being machined that apply in

the country of use must be observed.

u Avoid dust accumulation at the workplace. Dust can

easily ignite.

Operation

Start-up

Inserting the battery

Note: The use of batteries unsuitable for your power tool can

lead to malfunctions or damage to the power tool.

Set the rotational direction switch (6) to the middle position

to avoid unintentionally switching it on. Insert the charged

Bosch Power Tools 1 609 92A 53J | (03.07.2020)

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Bosch GSR 12V-15 FC Atornillador taladrador. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Bosch. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Bosch GSR 12V-15 FC Atornillador taladrador en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Bosch Atornilladores taladrador
Más manuales de Atornilladores taladrador

Preguntas frecuentes sobre Bosch GSR 12V-15 FC Atornillador taladrador

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Bosch GSR 18V-28 Atornillador taladrador

Manual de uso

Bosch GSR 14,4 V-LI Professional Atornillador taladrador

Manual de uso

Bosch PSB Universal LI-2 Atornillador taladrador

Manual de uso

Bosch GSR 12V-35 HX Atornillador taladrador

Manual de uso

Bosch PSR 180 LI-8 Atornillador taladrador

Manual de uso

Bosch GSR 18VE-EC Atornillador taladrador

Manual de uso

Bosch PSR 14.4 LI Atornillador taladrador

Manual de uso

Bosch GSB 10.8-2-LI Professional Atornillador taladrador

Categorias relacionadas