Manual de uso Conair BC86WCS Moldeador
¿Necesita un manual para su Conair BC86WCS Moldeador? A continuación puedes ver y descargar el manual en PDF gratis en español. Este producto actualmente tiene 2 preguntas frecuentes, 0 comentarios y tiene 0 votos. Si este no es el manual que desea, , contáctenos.
¿Su producto tiene algún defecto y el manual no ofrece ninguna solución? Vaya a Repair Café para solicitar un servicio de reparación gratuito.
Manual de uso
Loading…
Chrome
barrel
Tangle-free
swivel cord
25 temperature
settings
Cool tip
Turbo Heat
®
On/Off button
Power
indicator
light
3/4" in. (19mm)
Model BC84
Turbo
indicator
light
On/Off
buttons
®
Models BC84WCS and BC86WCS
instant heat
hot
®
big curls & volume
Instruction & Styling Guide
For your safety and continued enjoyment
of this product, always read the
instruction book carefully before using.
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially
when children are present, basic safety pre-
cautions should always be taken, including
the following:
READ ALL
INSTRUCTIONS
BEFORE USING
KEEP AWAY
FROM WATER
DANGER
—
Any appliance is electrically
live even when the switch is off.
To reduce the risk of death by electric shock:
1. Always unplug appliance immediately
after using.
2. Do not use while bathing or in a shower.
3. Do not place or store appliance where it can
fall or be pulled into a tub or sink.
4. Do not place in, or drop into water or other
liquid.
5. If an appliance falls into water, unplug it
immediately. Do not reach into the water.
WARNING
—
To reduce the risk of
burns, electrocution, fire, or injury to persons:
1. This appliance should never be left unat-
tended when plugged in.
2. This appliance should not be used by, on, or near
children or individuals with certain disabilities.
3. Use this appliance only for its intended use
as described in this manual. Do not
use attachments not recommended by
the manufacturer.
4. Never operate this appliance if it has a
damaged cord or plug, if it is not working
properly, or if it has been dropped or dam-
aged, or dropped into water.
Return the
appliance to an authorized ser
vice center
for examination and repair.
5. Keep the cord away from heated surfaces.
Do not pull, twist, or wrap cord around
appliance, even during storage.
6. Never block the air openings of the
appliance or place it on a soft surface, such
as a bed or couch, where the air openings
may be blocked. Keep the air openings free
of lint, hair, and other debris.
7. Never use while sleeping.
8. Never drop or insert any object into any
opening or hose.
9. Do not use outdoors or operate where
aerosol (spray) products are being used or
where oxygen is being administered.
10. Do not use an extension cord to operate
appliance.
11. This hot brush is hot when in use. Do not
let heated surfaces touch eyes or skin.
12. Do not place the heated hot brush direct-
ly on any surface or on the appliance power
cord while it is hot or plugged in.
13. Do not touch hot surface of the appliance;
use handles or cool tip.
14. Before plugging in, read the information
about dual voltage in the operating instructions
section of this manual.
15. Do not use a voltage converter with this
product.
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
This curling appliance is intended for
household use. Use on Alternating Current
(50/60 hertz) only. This appliance has a
polarized plug (one blade is wider than the
other). As a safety feature, this plug will fit in a
polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician.
Do not attempt to defeat this safety feature.
DUAL VOLTAGE
This hot brush has dual voltage. Use an
adapter plug with a configuration appropriate
to the outlet you are using. The hot brush will
automatically adjust to the proper voltage.
GETTING STARTED
The hot brush’s 25 temperature settings
and Instant Heat technology provide styling
versatility for all hair types. If you have fine
hair, a low temperature will provide the best
results. If you have thick, wavy or hard-
to-curl hair, keep the heat setting on high.
You can vary the temperature of the brush
according to your particular need!
SUPER STYLING GUIDE
Your best looks begin with a good haircut
that’s well maintained. Always treat hair well
with superior quality shampoos, conditioners,
and finishing products.
CURLING BASICS
1. Plug the hot brush cord into a standard
household electrical outlet (120/240V).
Never leave your hot brush on and
unattended. However, should you fail to turn
it off, it will shut itself off automatically in
approximately 60 minutes.
2. Use of the hot brush is very easy to master.
Roll one section of hair at a time around
the hot brush from the bottom up. To avoid
tangling, never roll the hair around the hot
brush more than two times. When hair is
warm (not hot) to the touch, the curl is set. For
hair that is harder to curl, leave the hot brush
in place a little longer. A hot brush generally
gives a lighter curl than a curling iron – for
very hard-to-curl hair, try switching to your
curling iron.
3. The hot brush can be used for quick touch-
ups. After heating the hot brush, simply brush the
hair back to its original style. To change the style,
mist the hair lightly with water before using the
hot brush. No combing is necessary!
TO STRAIGHTEN
To relax natural waves, pull small section
taut, then pass brush over hair from roots to
ends. Repeat procedure until natural waves
are relaxed.
TO WAVE
For flowing waves, separate a wider section of
hair than you normally do for curling, and roll it
as you usually do. For best results, hair should
be at least 6-8 inches long.
ON BLUNT CUTS
Use hot brush on blunt cuts to eliminate
kinks or unwanted flips by just turning the
hair under.
USING INSTANT HEAT AND THE
25 VARIABLE TEMPERATURE SETTINGS
AND HEAT RECOVERY SYSTEM
This hot brush features Conair’s Instant Heat
technology. It heats up to the temperature
you’ve selected for your hair type.
This Instant Heat technology includes 25
variable temperature settings for every type of
hair, from the finest to the curliest and most
resistant. Select the temperature range that’s
suitable for your hair type to help you create the
look you want.
Temperature Setting Guide
Temp. Control Hair Type
Low 1–8 Delicate, thin, easy-to-curl hair
Medium 9–14 Average to thick or treated hair
Med-High 15–20 Thick or wavy hair
High 21–25 Hard-to-curl hair
Turbo Heat
®
Up to 20˚C/36˚F burst of heat
for difficult styling spots
And that’s not all. Conair’s professional salon
standards of engineering provide you with
a Uniform Heat Recovery System that main-
tains the hot brush at constant temperatures.
There is a constant surge of power to ensure
that heat is continuously delivered for optimal
styling results, unlike other units which
lose heat during use. This recovery system
provides consistent styling power so that
every strand of your hair is set with the same
level of heat and comes out the same way for
a perfect finish.
GET TO KNOW YOUR HOT BRUSH
1¼" in. (32mm) Model BC86
WARNING: The hot brush’s barrel will get
very hot within a few seconds and should not
come in contact with skin after the hot brush
is turned on.
AVAILABLE IN THE FOLLOWING SIZES:
Curling Irons
½ in. (13mm)
Model CD80
¾ in. (19mm)
Model CD81
1 in. (25mm)
Model CD87
1¼ in. (32mm)
Model CD82
1½ in. (38mm)
Model CD89
Hot Brush
¾ in. (19mm)
Model BC84
1¼ in. (32mm)
Model BC86
USER
MAINTENANCE
Your hot brush is virtually maintenance-free.
No lubrication is needed. Keep all vents and
openings clear of dirt and dust. If cleaning
becomes necessary, disconnect the hot brush
from the power source, let it cool, and wipe
exterior with a cloth. If any abnormal condition
occurs, unplug the hot brush, allow it to cool,
and return it for repair to an authorized service
center only. No repairs should be attempted by
the consumer.
CAUTION
NEVER allow the power supply cord to
be pulled or twisted. Never wrap the cord
around the hot brush. Damage will occur at
the high flex point of entry into the hot brush,
causing it to rupture and short circuit. Inspect
the cord frequently for damage. Stop use
immediately if damage is visible or if unit
stops or operates intermittently.
STORAGE
When not in use, your appliance should be
disconnected, allowed to cool, and stored in a
safe, dry location out of reach of children. Do
not jerk or strain cord at plug connections. Do
not wrap the line cord around the appliance.
Allow the cord to hang or lie loose and straight
at the point of entry into the appliance.
WARNING:
IF YOU THINK
THE POWER IS OFF
WHEN THE SWITCH
IS OFF,
YOU’RE WRONG.
KEEP AWAY FROM WATER
Everyone knows that electricity and water
are a dangerous combination. But did you
know that an electric appliance is still elec-
trically live even if the switch is off?
If the plug is in, the power is on. So when
you are not using your appliances, keep
them unplugged.
ALWAYS UNPLUG
SMALL APPLIANCES
LIMITED TWO-YEAR WARRANTY
Conair will repair or replace (at our option) your
unit free of charge for 24 months from the
date of purchase if the appliance is defective
in workmanship or materials.
To obtain service under this warranty,
return the defective product to the service
center listed, together with your purchase
receipt and $7.50 for postage and handling.
California residents need only provide proof of
purchase and should call 1-800-3-CONAIR
for shipping instructions. In the absence of a
purchase receipt, the warranty period shall be
24 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS,
OR LIABILITIES, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED
IN DURATION TO THE 24-MONTH DURATION
OF THIS WRITTEN, LIMITED WARRANTY.
Some states do not allow limitations on how
long an implied warranty lasts, so the above
limitations may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE
FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF
THIS OR ANY OTHER WARRANTY, EXPRESS
OR IMPLIED, WHATSOEVER. Some states do
not allow the exclusion or limitation of special,
incidental, or consequential damages, so the
above limitation may not apply to you.
This warranty gives you specific legal rights,
and you may also have other rights, which
vary from state to state.
Service Center
Conair Corporation
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
Please register this product at:
www.conair.com/registration
For information on any Conair product,
call 1-800-3-CONAIR or visit us on the
web at: www.conair.com
©2012 Conair Corporation
150 Milford Road, East Windsor, NJ 08520
7475 N. Glen Harbor Blvd., Glendale, AZ 85307
11PA123649
IB-10898
Loading…
Puntuación
Dé su opinión de la Conair BC86WCS Moldeador calificando el producto. ¿Quiere compartir su experiencia con este producto o hacer una pregunta? Deje un comentario en la parte inferior de la página.Más sobre este manual
Entendemos que es bueno tener un manual en papel para tus Conair BC86WCS Moldeador. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Conair. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Conair BC86WCS Moldeador en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.
Especificaciones
| Marca | Conair |
| Modelo | BC86WCS |
| Categoría | Moldeadores |
| Tipo de archivo | |
| Tamaño del archivo | 0.54 MB |
Todos los manuales para Conair Moldeadores
Más manuales de Moldeadores
Preguntas frecuentes sobre Conair BC86WCS Moldeador
Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.
¿Puedo usar un moldeador de pelo con el cabello mojado? Verificado
No es aconsejable utilizar un moldeador de pelo con el cabello mojado. Para obtener los mejores resultados, el cabello debe estar completamente seco.
Ha sido de gran ayuda (91) Leer más¿Puedo enrollar el cable alrededor del dispositivo después de su uso? Verificado
Es mejor no hacer esto, porque puede dañar el cable. Lo mejor que puede hacer es enrollar el cable tal como estaba cuando se empacó el producto.
Ha sido de gran ayuda (22) Leer más
Únase a la conversación sobre este producto
Aquí puedes compartir lo que piensas sobre Conair BC86WCS Moldeador. Si tiene alguna pregunta, primero lea atentamente el manual. Puede solicitar un manual utilizando nuestro formulario de contacto.