Manual de uso DeWalt DWS520K Sierra de inmersión

Manual de uso

English

4

their own weight. Support must be placed under the panel

on both sides, near the line of cut and near the edge of the

panel.

e) Do not use dull or damaged blade. Unsharpened or

improperly set blades produce narrow kerf causing excessive

friction, blade binding, and kickback.

f) Blade depth and bevel adjusting locking levers must be

tight and secure before making cut. If blade adjustment

shifts while cutting, it may cause binding and kickback.

g) Use extra caution when making a “Plunge Cut” into

existing walls or other blind areas. The protruding blade

may cut objects that can cause kickback.

Safety Instructions for Plunge-Type

Saws

a) Check guard for proper closing before each use. Do

not operate the saw if guard does not move freely and

enclose the blade instantly. Never clamp or tie the guard

with the blade exposed. If saw is accidentally dropped,

guard may be bent. Check to make sure that guard moves

freely and does not touch the blade or any other part, in all

angles and depths of cut.

b) Check the operation and condition of the guard return

spring. If the guard and the spring are not operating

properly, they must be serviced before use. Guard may

operate sluggishly due to damaged parts, gummy deposits,

or a build-up of debris.

c) Assure that the guide plate of the saw will not shift while

performing the “plunge cut” when the blade bevel setting

is not at 90°. Blade shifting sideways will cause binding and

likely kickback.

d) Always observe that the guard is covering the blade before

placing saw down on bench or floor. An unprotected,

coasting blade will cause the saw to walk backwards, cutting

whatever is in its path. Be aware of the time it takes for the

blade to stop after switch is released.

Additional Safety Instructions for All

Saws with Riving Knife

a) Use the appropriate riving knife for the blade being used.

For the riving knife to work, it must be thicker than the body

of the blade but thinner than the tooth set of the blade.

b) Adjust the riving knife as described in this instruction

manual. Incorrect spacing, positioning and alignment can

make the riving knife ineffective in preventing kickback.

c) Always use the riving knife except when plunge cutting.

Riving knife must be replaced after plunge cutting. Riving

knife causes interference during plunge cutting and can

create kickback. Model DWS520 does not require removal

of the riving knife because the riving knife retracts during a

plunge cut.

d) For the riving knife to work, it must be engaged in the

workpiece. The riving knife is ineffective in preventing

kickback during short cuts.

e) Do not operate the saw if riving knife is bent. Even a light

interference can slow the closing rate of a guard.

Additional Safety Instructions for Saws

• Wear ear protectors. Exposure to noise can cause hearing

loss.

• Wear a dust mask. Exposure to dust particles can cause

breathing difficulty and possible injury.

• Use only recommended blades. The saw is designed for use

with 6-1/2" (165 mm) diameter blades that have a 0.79" (20 mm)

diameter bore. Blades must be rated for 6000 RPM operation (or

higher).

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus DeWalt DWS520K Sierra de inmersión. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con DeWalt. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu DeWalt DWS520K Sierra de inmersión en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para DeWalt Sierras de inmersión
Más manuales de Sierras de inmersión

Preguntas frecuentes sobre DeWalt DWS520K Sierra de inmersión

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

DeWalt DWS520SKH Sierra de inmersión

Manual de uso

Stayer CPT 3000 E Sierra de inmersión

Manual de uso

Virutex SRI174T Sierra de inmersión

Manual de uso

Parkside IAN 353273 Sierra de inmersión

Manual de uso

Festool TSC 55 REBI-F-Set-FS Sierra de inmersión

Manual de uso

Mafell KSP 40 Flexistem Sierra de inmersión

Manual de uso

Parkside IAN 282339 Sierra de inmersión

Manual de uso

Festool TS 55 REQ-F-Plus Sierra de inmersión

Categorias relacionadas