Manual de uso Hikoki DS 9DVF3 Atornillador taladrador

Manual de uso

5

English

Tightening torque adjustment 3 115

Selecting the drill position 4 115

Change rotation speed 5 115

Mounting the bit 6 115

Reversing the rotational direction 7 116

Switch operation 8 116

Using the hook 9 116

Using the bit holder 10 116

Selecting accessories ― 117

MAINTENANCE AND INSPECTION

1. Inspecting the tool

Since use of as dull tool will degrade effi ciency and

cause possible motor malfunction, sharpen or replace

the tool as soon as abrasion is noted.

2. Inspecting the mounting screws

Regularly inspect all mounting screws and ensure that

they are properly tightened. Should any of the screws be

loose, retighten them immediately. Failure to do so could

result in serious hazard.

3. Maintenance of the motor

The motor unit winding is the very “heart” of the power

tool. Exercise due care to ensure the winding does not

become damaged and/or wet with oil or water.

4. Cleaning on the outside

When the driver drill is stained, wipe with a soft dry cloth

or a cloth moistened with soapy water. Do not use chloric

solvents, gasoline or paint thinner, for they melt plastics.

5. Storage

Store the driver drill in a place in which the temperature

is less than 40°C and out of reach of children.

NOTE

Make sure that the battery is fully charged when stored

for a long period (3 months or more). The battery with

smaller capacity may not be able to be charged when

used, if stored for a long period.

CAUTION

In the operation and maintenance of power tools, the

safety regulations and standards prescribed in each

country must be observed.

Important notice on the batteries for the HiKOKI

cordless power tools

Please always use one of our designated genuine

batteries. We cannot guarantee the safety and

performance of our cordless power tool when used with

batteries other than these designated by us, or when

the battery is disassembled and modifi ed (such as

disassembly and replacement of cells or other internal

parts).

GUARANTEE

We guarantee HiKOKI Power Tools in accordance with

statutory/country specifi c regulation. This guarantee does

not cover defects or damage due to misuse, abuse, or

normal wear and tear. In case of complaint, please send

the Power Tool, undismantled, with the GUARANTEE

CERTIFICATE found at the end of this Handling instruction,

to a HiKOKI Authorized Service Center.

Information concerning airborne noise and vibration

The measured values were determined according to

EN60745 and declared in accordance with ISO 4871.

<DS9DVF3, DS12DVF3>

Measured A-weighted sound power level: 74 dB (A)

Measured A-weighted sound pressure level: 63 dB (A)

Uncertainty K: 3 dB (A).

<DS14DVF3, DS18DVF3>

Measured A-weighted sound power level: 80 dB (A)

Measured A-weighted sound pressure level: 69 dB (A)

Uncertainty K: 3 dB (A).

Wear hearing protection.

Vibration total values (triax vector sum) determined

according to EN60745.

As drill:

Vibration emission value

a

h

, D = 0.9 m/s

2

(DS9DVF3)

1.5 m/s

2

(DS12DVF3)

1.6 m/s

2

(DS14DVF3)

1.8 m/s

2

(DS18DVF3)

Uncertainty K = 1.5 m/s

2

The declared vibration total value has been measured in

accordance with a standard test method and may be used

for comparing one tool with another.

It may also be used in a preliminary assessment of exposure.

WARNING

○ The vibration emission during actual use of the power

tool can diff er from the declared total value depending in

the ways in which the tool is used.

○ Identify safety measures to protect the operator that

are based on an estimation of exposure in the actual

conditions of use (taking account of all parts of the

operating cycle such as the times when the tool is

switched off and when it is running idle in addition to the

trigger time).

NOTE

Due to HiKOKI’s continuing program of research and

development, the specifi cations herein are subject to

change without prior notice.

0000Book̲DS9DVF3.indb50000Book̲DS9DVF3.indb5 2017/12/048:51:072017/12/048:51:07

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Hikoki DS 9DVF3 Atornillador taladrador. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Hikoki. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Hikoki DS 9DVF3 Atornillador taladrador en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Hikoki Atornilladores taladrador
Más manuales de Atornilladores taladrador

Preguntas frecuentes sobre Hikoki DS 9DVF3 Atornillador taladrador

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Hikoki DS 18DD Atornillador taladrador

Manual de uso

Hikoki DS 14DSDL Atornillador taladrador

Manual de uso

Hikoki DV 18DGAL Atornillador taladrador

Manual de uso

Hikoki DS 14DCL Atornillador taladrador

Manual de uso

Hikoki DS 10DAL Atornillador taladrador

Manual de uso

Hikoki DS 14DL2 Atornillador taladrador

Manual de uso

Hikoki DV 18DD Atornillador taladrador

Manual de uso

Skil 3020 HC Atornillador taladrador

Categorias relacionadas