Manual de uso Kichler 10766WHLED Ceiling Lámpara

¿Necesita un manual para su Kichler 10766WHLED Ceiling Lámpara? A continuación puedes ver y descargar el manual en PDF gratis en español. Este producto actualmente tiene 7 preguntas frecuentes, 0 comentarios y tiene 0 votos. Si este no es el manual que desea, , contáctenos.

¿Su producto tiene algún defecto y el manual no ofrece ninguna solución? Vaya a Repair Café para solicitar un servicio de reparación gratuito.

Manual de uso

Loading…

Date Issued: 05/18/17
IS-10766LED-US
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
WARNING:
• This fixture is intended for installation in accordance with the National Electric Code
(NEC) and all local code specifications.
Supply wires are not intended for use through or concealed behind walls, floors, or
ceilings.
CAUTION – RISK OF SHOCK – Disconnect Power at the main circuit breaker panel or
main fuse box before starting and during the installation.
1) Read and understand all instructions and illustrations completely before proceeding
with assembly and installation of fixture.
2) If you have any doubts about how to install this fixture, or if the fixture fails to
operate completely, please contact a qualified electrician.
3) All parts must be used as indicated in the instructions. Do not substitute any parts,
leave parts out, or use any parts that are worn or broken. Failure to obey this instruction
could invalidate the UL listing, C.S.A. certification, and/or ETL listing of this fixture.
4) Fixture is to be connected to a single branch circuit.
5) Mounting surface should be clean, dry, flat and 1/4” larger than the fixture housing
surface.
6) Remove lens. Twist diffuser counterclockwise to remove it from the fixture. Set
aside. DO NOT touch LEDs with hands or fingers.
7) Install (2) two mounting screws into the outlet box, leaving small amount of threads
exposed.
8) Grounding instructions: (See Illus. A or B).
A) On fixtures where mounting strap is provided with a hole and two raise dimples.
Wrap ground wire from outlet box around green ground screw, and thread into
hole.
B) On fixtures where a cupped washer is provided. Put ground wire from outlet box
under cupped washer and green ground screw and thread screw into hole in
mounting strap.
If fixture is provided with ground wire. Connect fixture ground wire to outlet box
ground wire with wire connector, (not provided) after following the above steps. Never
connect ground wire to black or white power supply wires.
9) Make wire connections. Reference chart below for correct connections and wire
accordingly.
10) Carefully push wire connections back into outlet box making sure all connections
remain secure.
11) Push fixture over outlet box and align the larger hole side of keyhole slot with
screws in outlet box. Push fixture to ceiling and turn fixture in direction of smaller
side of keyhole slots until it stops. Tighten strap mounting screws to secure.
12) Place diffuser up to canopy and align the open sections of diffuser slots. Push
diffuser up to backplate and twist clockwise to lock in place.
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
A
B
Connect Black or
Red Supply Wire to:
Connect
White Supply Wire to:
Black White
*Parallel cord (round & smooth) *Parallel cord (square & ridged)
Clear, Brown, Gold or Black
without tracer
Clear, Brown, Gold or Black
with tracer
Insulated wire (other than green)
with copper conductor
Insulated wire (other than green)
with silver conductor
*Note: When parallel wires (SPT I & SPT II)
are used. The neutral wire is square shaped
or ridged and the other wire will be round in
shape or smooth (see illus.)
Neutral Wire
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a par-
ticular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
SEE OTHER SIDE FOR SPANISH TRANSLATIONS.
VEA EL OTRO LADO DE TRADUCCIONES AL ESPAÑOL.
OUTLET BOX
WIRE
CONNECTORS
CANOPY
DIFFUSER
MOUNTING SCREWS
INSTALLATION INSTRUCTIONS
Model 10766LED / CP159837
Model 10767LED / CP159838
Model 10768LED / CP159839
Descargue el manual en Español (PDF, 0.22 MB)
(Piense en el medioambiente y solo imprima este manual si es de verdad necesario)

Loading…

Puntuación

Dé su opinión de la Kichler 10766WHLED Ceiling Lámpara calificando el producto. ¿Quiere compartir su experiencia con este producto o hacer una pregunta? Deje un comentario en la parte inferior de la página.
¿Estás satisfecho con elKichler 10766WHLED Ceiling Lámpara?
No
Sea el primero en calificar este producto
0 votos

Únase a la conversación sobre este producto

Aquí puedes compartir lo que piensas sobre Kichler 10766WHLED Ceiling Lámpara. Si tiene alguna pregunta, primero lea atentamente el manual. Puede solicitar un manual utilizando nuestro formulario de contacto.

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Kichler 10766WHLED Ceiling Lámpara. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Kichler. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Kichler 10766WHLED Ceiling Lámpara en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Marca Kichler
Modelo 10766WHLED Ceiling
Categoría Lámparas
Tipo de archivo PDF
Tamaño del archivo 0.22 MB

Todos los manuales para Kichler Lámparas
Más manuales de Lámparas

Preguntas frecuentes sobre Kichler 10766WHLED Ceiling Lámpara

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

¿Es regulable toda la iluminación led? Verificado

No, no todas las bombillas led son regulables. Esto se indica en el embalaje o en la propia bombilla.

Ha sido de gran ayuda (577) Leer más

Puse una nueva luz en mi lámpara pero no se enciende, ¿por qué? Verificado

Algunas lámparas están hechas para fuentes de luz de un vataje específico. Cuando se inserta una fuente de luz que requiere una potencia superior a la que puede proporcionar la lámpara, es posible que la luz no se encienda. Si la lámpara entrega un vataje mucho más alto de lo que está hecha la fuente de luz, la fuente de luz puede quemarse.

Ha sido de gran ayuda (433) Leer más

¿Por qué es importante el color de la luz? Verificado

Ha sido de gran ayuda (335) Leer más

¿Qué significa lumen? Verificado

Lumen es una unidad de medida para la cantidad total de luz visible emitida por una fuente.

Ha sido de gran ayuda (262) Leer más

¿Cuáles son las bases de tornillo que existen? Verificado

Hay muchos tipos de bases de tornillo en el mundo, pero la mayor parte está basada en la rosca Edison, indicada por la letra E. En la mayor parte de los países las bases de tornillo E27 y E14 son las más comunes. En los Estados Unidos las E26, E17, E12 y E10 son estándar.

Ha sido de gran ayuda (204) Leer más

¿Qué dicen los vatios acerca de mi lámpara? Verificado

El vatio es una unidad de medida para el consumo de electricidad. Las lámparas que emiten más luz suelen consumir más vatios, pero para comparar la potencia luminosa siempre debe usar los lúmenes.

Ha sido de gran ayuda (173) Leer más

¿Qué significa led? Verificado

Led significa diodo emisor de luz. Al guiar la electricidad en la dirección correcta a través de un semiconductor, se emite la luz.

Ha sido de gran ayuda (164) Leer más
Manual de uso Kichler 10766WHLED Ceiling Lámpara

Productos relacionados

Categorias relacionadas

×
Download