Manual de uso Klip Xtreme KLS-650 Charme Altavoz

Manual de uso

VI. Advanced operation

Pairing the speaker with wireless devices

VII. Troubleshooting

Recommendation: Use an SD™ card to enable audio playback from compatible files stored in an SD™ memory card.

a. First, connect an SD™ card to the SD™ port of the speaker.

b. The speaker will detect the SD™ card and play the audio files. If the SD™ card is not automatically detected,

press the MODE button to toggle through the different modes available until the preferred mode is found:

Line In, Bluetooth®, USB, SD

TM

, FM.

c. Start streaming audio files directly from the source of choice.

d. Press and hold the button to play or pause the audio. Press this button shortly to go to the previous or

next track.

e. FM (radio) mode

3. SD

TM

mode operation

c. Start streaming audio files directly from the source of choice.

d. Press and hold the button to play or pause the audio. Press this button shortly to go to the previous or

next track.

1. Press the MODE button briefly to toggle through the available audio sources and select FM.

2. Press and hold the PLAY/PAUSE button to start searching for radio stations automatically, in the radio

frequency range between 87.5 and 108.0 MHz. The unit can store 20 radio stations. To play any of the

stored radio stations directly, press a number button on the remote.

f. How to use the recording feature

1. First, make sure to have a microphone connected and a compatible memory card or USB drive inserted in

order to activate the recording feature.

2. The unit will select the USB source as the default source to save the recording. In case there is no a USB

source inserted, the unit will select the SD

TM

source as an alternative. Press the REC button until Rec is

displayed on the screen.

3. Start recording, and when finished, briefly press the REC button again to stop and play the recording.

4. To delete a recording, first go to Rec. Play Mode and the unit will select the channels where the

recordings were saved. Pick the recording you wish to eliminate and press Delete.

Note: Before installing this product, please make sure your device is compatible with Bluetooth®.

1. Enable the Bluetooth® feature on the selected source and set it to discover the wireless speaker.

2. Place your wireless device and the speaker not more than one meter away from each other.

3. Next, cycle to the Bluetooth® feature on the speaker by pressing the MODE button found on the media

panel and select it as the input source. The bt symbol blinks fast on the display to indicate that the

speaker has entered into the pairing mode.

4. Once the speaker appears listed under the newly found Bluetooth® devices (KLS-650) of your wireless

device, select it and wait a few seconds for pairing.

5. When pairing is successful, the bt symbol stops blinking indicating that the Bluetooth® is connected. If after

60 seconds the pairing process fails, please repeat steps 1 through 5 described above.

6. You can now start streaming audio through the speaker wirelessly from your favorite Bluetooth®-enabled

devices.

7. The speaker will re-pair automatically to the memorized device when the BT mode is selected on the

unit after being turn off and on again.

Technical specifications

Device

MPN KLS-650

Speaker

Microphone

Type

Reference RMS power

Maximum power output (PMPO)

AC Input

DC input

Buttons

Driver unit

Subwoofer

Reference RMS power

Frequency

Impedance

Sensitivity

Signal to noise ratio

THD

Loudspeaker system

100W

1000W

100V - 240V (autosensing) 60/50Hz

12V

7 buttons (Mega Bass, Menu, Play/Pause, Mode, Previous,

Next, Volume +/-)

8inch at 4Ω

80W

20Hz-4kHz

4Ω, ±20%

87dB, ±2dB

≥70dB

1kHz 0dB (±10%)

Problem Possible cause Solution

The speaker is On but

there is no sound

Sound is distorted

There is no sound coming

from the USB/SD

TM

files

There is no sound coming

from the microphone

Problem to reproduce

an FM station

There is noise/interference

coming from the speaker

Bluetooth

®

connection

fails

1: There is no input sound source connected

2: Volume knob is in the lowest position

3: USB/SD

TM

is not connected

1: The microphone jack is not fully plugged in

2: The microphone switch is not on

3: Microphone volume is in the lowest position

1:The wired microphone is used too close

to the speaker

2:The wired microphone switch is on but the

microphone is not in use

3: The microphone volume is too loud

4: The mobile phone is too close to the speaker

5: There are other devices too close to the speaker

1: Bluetooth

®

connection is disconnected

2: Bluetooth

®

connection is established but

there is no sound

3: Bluetooth

®

connection effective distance is

not enough

1:The unit doesn’t search radio channels or the

transmission is not clear

1: The volume is too loud

2: Audio file error

1: The song format is not compatible with

the file format.

2: The USB/SD

TM

audio source is not inserted properly

1: Connect an input sound source

2: Adjust the volume

3: Insert a USB/ SD

TM

audio source

1: Turn the volume down

1. a: Adjust the Bass/Treble frequencies

and the main volume

2: Check and change the audio file

1: The file should be a MP3/WMA music file

1.a: Check the USB size (if the file is bigger

than 2G the unit will take longer to

reproduce the file)

2: Insert the USB/SD

TM

audio source properly

1: Plug the microphone jack correctly

2: Turn on the microphone

3: Adjust the volume of the microphone

1: The FM antenna is not properly expanded

2: Try to position the antenna in a different angle

4: Try the “Auto scan” function

1: Do not let wired microphones point directly

at the speaker

2: Turn off the wired microphone if not in use

3: Turn down the volume of the microphone

4: Keep the mobile device away from the

speaker during calls

5: Keep the speaker away from other sources

of interference

1: Find the right device name (KLS-650)

or press and hold the the REPEAT button

to restore factory settings

2: Confirm that you are connected to the

right device (KLS-650)

3: Try to keep away from barriers, such as

walls, glass etc.

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Klip Xtreme KLS-650 Charme Altavoz. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Klip Xtreme. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Klip Xtreme KLS-650 Charme Altavoz en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Klip Xtreme Altavoces
Más manuales de Altavoces

Preguntas frecuentes sobre Klip Xtreme KLS-650 Charme Altavoz

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Klip Xtreme KSB-210 Tempo Altavoz

Manual de uso

Klip Xtreme KLS-700 Magno Altavoz

Manual de uso

Klip Xtreme KSB-260 ZynK Altavoz

Manual de uso

Klip Xtreme KES-215A Eklipse Altavoz

Manual de uso

Klip Xtreme KSB-220 Pristine Altavoz

Manual de uso

Klip Xtreme KSB-500 Zaffire Altavoz

Manual de uso

Klip Xtreme KWS-612 Kromatik Altavoz

Manual de uso

Klip Xtreme KBS-600 Oryx Altavoz

Categorias relacionadas