Manual de uso Maytag MGC4436BDB Placa

Manual de uso

•

Be sure appliance is off and all parts

are cool before handling or cleaning.

This is to avoid damage and possible

burns.

•

To prevent staining or discoloration,

clean appliance after each use.

•

If a part is removed, be sure it is cor-

rectly replaced.

Cleaning

Procedures

BURNER CAPS AND SEALED

GAS BURNERS

Removable Burner Caps

•

Allow burner to cool. Remove burner cap

and wash in soapy water with a plastic

scouring pad. For stubborn soils, clean

with a soap-filled, nonabrasive pad or

Cooktop Cleaning Creme (Part

#20000001)** and a sponge.

•

Do not clean in dishwasher or self-clean-

ing oven.

Sealed Gas Burner

•

Clean frequently. Allow burner to cool.

Clean with soap and plastic scouring pad.

For stubborn soils, clean with a soap-filled,

nonabrasive pad.

•

Be careful not to get water into the center

of the burner.

•

Use care when cleaning the ignitor. If the

ignitor is wet or damaged the surface

burner will not light.

•

To ensure even cooking performance, keep

burner ports free of food soils/debris.

BURNER GRATES

•

Wash grates with warm, soapy water and

a nonabrasive, plastic scrubbing pad. For

stubborn soils, clean with a soap-filled,

nonabrasive pad or Cooktop Cleaning

Creme (Part #20000001)** and a sponge. If

soil remains, reapply Cooktop Cleaning

Creme, cover with a damp paper towel

and soak for 30 minutes. Scrub again, rinse

and dry.

•

Do not clean in dishwasher or self-clean-

ing oven.

CONTROL KNOBS

•

Remove knobs in the OFF position by

pulling up.

•

Wash, rinse and dry. Do not use abrasive

cleaning agents as they may scratch the

finish.

•

Turn on each burner to be sure the knobs

have been correctly replaced.

COOKTOP - PORCELAIN

ENAMEL

Porcelain enamel is glass fused on metal and

may crack or chip with misuse. It is acid

resistant, not acid proof. All spillovers, espe-

cially acidic or sugary spillovers, should be

wiped up immediately with a dry cloth.

•

When cool, wash with soapy water, rinse

and dry.

•

Never wipe off a warm or hot surface with

a damp cloth. This may cause cracking or

chipping.

•

Never use oven cleaners, abrasive or caus-

tic cleaning agents on exterior finish of

cooktop.

COOKTOP - STAINLESS STEEL

(SELECT MODELS)

•

DO NOT USE ANY CLEANING PROD-

UCT CONTAINING CHLORINE

BLEACH.

•

ALWAYS WIPE WITH THE GRAIN

WHEN CLEANING.

•

Daily Cleaning/Light Soil –– Wipe with

one of the following - soapy water, white

vinegar/water solution, Formula 409 Glass

and Surface Cleaner* or a similar glass

cleaner - using a sponge or soft cloth. Rinse

and dry. To polish and help prevent finger-

prints, follow with Stainless Steel Magic

Spray (Part No. 20000008)**.

•

Moderate/Heavy Soil –– Wipe with one of

the following - Bon Ami*, Smart Cleanser*,

or Soft Scrub* - using a damp sponge or soft

cloth. Rinse and dry. Stubborn soils may be

removed with a damp Scotch-Brite* pad;

rub evenly with the grain. Rinse and dry.

To restore luster and remove streaks, fol-

Care & Cleaning

* Brand names are registered trademarks of the respective manufacturers.

** To order call 1-877-232-6771 USA and 1-800-688-8408 Canada.

Before You

Call for

Service

low with Stainless Steel Magic Spray.

•

Discoloration –– Using a damp sponge or

soft cloth, wipe with Cameo Stainless Steel

Cleaner*. Rinse immediately and dry. To

remove streaks and restore luster, follow

with Stainless Steel Magic Spray.

SURFACE BURNER FAILS TO LIGHT.

•

Check to be sure plug is securely inserted

into receptacle.

•

Check or re-set circuit breaker. Check or

replace fuse.

•

Check power supply.

•

Check to be sure burner is correctly rated

for your kind of gas.

•

Check to be sure burner ports or ignition

ports are not clogged.

•

Check to be sure ignitor is dry and clicking.

Burner will not light if ignitor is damaged,

soiled or wet. If ignitor doesn’t click, turn

control knob OFF.

•

Check to be sure burner cap is correctly

seated on the burner base.

•

Check that the gas supply is on.

SURFACE BURNER FLAME LIFTS

OFF PORTS.

•

Check to be sure a pan is sitting on the grate

above.

•

Contact an authorized servicer.

THE FLAME IS UNEVEN.

•

Burner ports may be clogged.

•

Flame may need to be adjusted. Contact an

authorized servicer.

SURFACE BURNER FLAME IS

YELLOW IN COLOR.

•

Contact an authorized servicer.

•

Some yellow tips on the flame are accept-

able when using LP gas.

6

CAUTION

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Maytag MGC4436BDB Placa. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Maytag. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Maytag MGC4436BDB Placa en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Maytag Placas
Más manuales de Placas

Preguntas frecuentes sobre Maytag MGC4436BDB Placa

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Maytag MEC8830HB Placa

Manual de uso

Maytag MGC4436BDW Placa

Manual de uso

Maytag MEC8836HS Placa

Manual de uso

Maytag MEC8836HS00 Placa

Manual de uso

Maytag MEC8830HS Placa

Manual de uso

Mabe PM6040GV0 Placa

Manual de uso

Aspes AV2301 Placa

Manual de uso

Infiniton IND-230N Placa

Categorias relacionadas