Manual de uso NAD C 521i Reproductor de CD

Manual de uso

5

GB

CALENDAR DISPLAY TRACK LISTING Displays a list of tracks

available on the disc. As each track is played its number is

blanked out on the Track Listing, giving a simple indication of how

much of the disc has been played and how much remains. The

number for the current track being played blinks. The display

shows up to 16 numbered tracks.

STATUS A right-pointing arrowhead , located near the left

edge of the time display, lights up during PLAY. Two vertical bars

indicate that the player is in PAUSE. In STOP mode the

display reverts to showing the total number of tracks and playing

time of the disc.

no dISC When no disc is present or when you load a disc that

cannot be read (because it is dirty or is upside-down) “no dISC”

lights up in the display.

REMOTE RECEIVER An infrared sensor, located at the right-

hand portion of the display window, receives commands from the

remote control. There must be a clear line-of-sight path from the

remote control to this window; if that path is obstructed, the

remote control may not work.

4. OPEN

Press this button to open the disc drawer, and press it again to

close the drawer. If this button is pressed while a disc is being

played, playback will stop, the pickup will reset to the beginning of

the disc and the drawer will open. Opening the drawer will also

delete the players memory for Program Play. When the disc drawer

is open, the drawer-closing mechanism can also be activated by

pressing PLAY or by gently pushing the drawer inward.

NOTE: The disc drawer is opened and closed by an internal

motor. Do not close the drawer by hand with the power off.

When the drawer closes, the player scans the disc’s TOC (Table Of

Contents) and displays the total number of tracks and playing time

on the disc. If you press PLAY to close the drawer this information

is skipped, and play commences immediately at Track 1.

5. PLAY/PAUSE

This dual-function button alternates between starting and stopping

playback. Press to start play or to resume play after Pause. During

play, press this button to stop playback temporarily, keeping the

optical pickup at its current position on the disc. The PLAY mode

is identified by a right-pointing arrowhead in the display. The

PAUSE mode is identified by two vertical bars . To resume

playback at the exact point where it stopped, press PLAY/PAUSE

again. If you don’t want to resume play at the same point, you may

use the SKIP and SCAN controls to cue the pickup to a different

starting point before pressing PLAY again.

6. TIME

The TIME button alternates between displaying the elapsed or

remaining tracks and time of the disc or program being played. In

the default setting, the display will indicate the current track

number and time elapsed since the beginning of the track. Press

the button once to display the total number of remaining tracks

and time of the disc or program being played. Press again to

revert to the default, elapsed time display.

7. STOP

Press the STOP button once to stop playback, and re-sets the

pickup to the beginning of the disc. The display reverts to showing

the number of tracks and total playing time on the disc. If the CD

player was programmed to play a selection of tracks, the program

will be retained in the player’s memory. Pressing STOP a second

time will also delete the program. Pressing STOP twice will also

disengage Repeat and Random play if these were engaged.

8. REPEAT

This button engages the Repeat Play mode, an endless-repeat

cycle. Press the Repeat button once to select the REPEAT 1 mode,

in which only the current track is repeated over and over again.

Pressing the Repeat button once again selects the REPEAT ALL

mode, in which the entire disc is played from beginning to end,

over and over again. Press the Repeat button a third time to cancel

the repeat cycle and return to normal operation.

The Repeat Play mode can be used in combination with Program

and Random Play modes. When the C521i is in Repeat Play mode

“REPEAT 1” or “ALL” will be shown in the Display Panel. Repeat

Play mode can also be disengaged by pressing the STOP button

twice. On the first press of the STOP button, playback will stop, the

second press will disengage Repeat Play mode.

9. RANDOM

Engaging the Random Play mode will play all the tracks once on

the CD in a random order. From Stop, press first the RANDOM and

then the PLAY/PAUSE button to engage Random Play mode. During

normal playback the Random Play mode can also be engaged by

pressing the RANDOM button. The current track will stop playing

and the first randomly selected track will commence.

The Random Play mode can be used in combination with the

Repeat Play All mode but not with Program Play mode. When the

C521i is in Random mode “RANDOM” will be shown in the Display

Panel. Press the RANDOM button again to cancel Random Play

mode and return to normal Play mode. Random Play mode can

also be disengaged by pressing the STOP button twice. On the first

press of the STOP button, playback will stop, the second press will

disengage Random Play mode.

10. SCAN

The SCAN button causes the optical pickup to scan backward

through the recording at high speed. This button works only while

the player is in PLAY or PAUSE. After a STOP command, or after

loading a new disc, you must press PLAY before the scan circuit

will work. If Scan is initiated while the player is in PAUSE the scan

is silent; if initiated during PLAY the music will be heard in

fragmentary form at reduced volume as the player scans through

it. For the first approximately 50 seconds of a track, scanning will

be at around 3 times the speed, after which scanning speed

increases to around 15 times faster than normal playing speed.

Use this “audible scan” to cue the player precisely to the spot

where you want to resume play. If you scan back to the beginning

of the disc while playing Track 1, the player automatically reverts

to normal playback.

The SCAN button causes the optical pickup to scan rapidly

forward through the music. The behaviour of this function is

similar to SCAN . If you scan forward to the end of the disc

while playing the final track, the scan will stop and the Time

display will show the table of contents. (There is no “wrap-

around” mode.)

11. SKIP

During playback, press the SKIP button once to skip back to

the beginning of the current track. Press SKIP twice in rapid

succession to skip back to the previous track or previous

programmed track in Program Play mode, once to reach the

beginning of the current track and again to jump to the previous

track. When pressing continuously, the player will skip to previous

tracks repeatedly, concluding at the beginning of the disc

(Track 1) or the first track programmed in Program Play mode.

MEMORY During Program Play or programming for Program

Play, MEMORY will light up.

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus NAD C 521i Reproductor de CD. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con NAD. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu NAD C 521i Reproductor de CD en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para NAD Reproductores de CD
Más manuales de Reproductores de CD

Preguntas frecuentes sobre NAD C 521i Reproductor de CD

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

NAD L 40 Reproductor de CD

Manual de uso

NAD C 542 Reproductor de CD

Manual de uso

NAD 517 Reproductor de CD

Manual de uso

NAD C 521BEE Reproductor de CD

Manual de uso

NAD S 500i Reproductor de CD

Manual de uso

Pioneer X-HM21-S Reproductor de CD

Manual de uso

Denon DCD-800NE Reproductor de CD

Manual de uso

Samsung MAX-L68 Reproductor de CD

Categorias relacionadas