Manual de uso Steinel HG 2320 E Decapador por aire caliente

Manual de uso

- 11 -- 10 -

Always ensure that the blow-out

tube (including in combination

with mounted nozzle) is never

completely covered or sealed.

Damage to the heating element

or motor may otherwise result.

Beware of toxic gases and

fire hazards.

Toxic gases may occur when work-

ing on plastics, paints, varnishes or

similar materials.

Beware of fire and ignition hazards.

For your own safety, only use acces-

sories and attachments that are

specified in the operating instruc-

tions or recommended or specified

by the tool manufacturer.

Using attachments or accessories

other than those recommended in

the operating instructions or cata-

logue may result in personal injury.

Repairs must only be

carried out by a qualified

electrician.

This electric power tool complies

with the relevant safety regulations.

Repairs should only be performed

by a qualified electrician. Otherwise

the user may run the risk of acci-

dents. If this tool's main power cord

is damaged, it must be replaced

by the manufacturer or its customer

service department or a similarly

qualified person so as to avoid

hazards.

Please familiarise yourself with these operating instructions

before using this product because prolonged reliable and

trouble-free operation will only be ensured if it is handled

properly.

We hope your new hot air tool will give you lasting

satisfaction.

GB Translation of the original

operating instructions

About this document

Read and observe this informa-

tion before using the tool. Failure

to observe the operating instruc-

tions may result in the tool

becoming a source of danger.

When using electric power tools,

observe the following basic safety

precautions to avoid electric shock

as well as the risk of injury and fire.

Used carelessly, the tool can start

an unintentional fire or injure persons.

Check the tool for any damage

(mains connection lead, housing etc.)

before putting it into operation and

do not use the tool if it is damaged.

Do not leave the tool switched on

unattended.

Children should be supervised to

make sure they do not play with

the device.

First time of use

A small quantity of smoke may oc-

cur when the tool is used for the

first time. This smoke is caused by

binding agents released from the

heater's insulating film during the

first time of use.

To let the smoke escape quickly, the

tool should be set down on its

standing surface. The area you are

working in should be well ventilated

when using the tool for the first time.

Any smoke coming out of the tool is

not harmful!

Take the ambient conditions

into account.

Do not expose electric power tools

to rain. Do not use electric power

tools when they are damp or in a

damp or wet environment. Exercise

care when using the tool in the

proximity of flammable materials.

Do not direct the tool at one and

the same place for a prolonged peri-

od. Do not use in the presence of

an explosive atmosphere. Escaping

heat may be conducted to

flammable materials that are

hidden from direct sight.

Protect yourself from

electric shock.

Avoid coming in contact with

grounded objects, such as pipes,

radiators, cookers or refrigerators.

Do not leave the tool unattended

while in operation.

Store your tools in a

safe place.

After use, set the tool down on its

standing surface and let it cool

before putting it away.

When not in use, tools must be

stored in a dry, locked room out of

children's reach.

This tool may be used by children

aged 8 or above and by persons

with reduced physical, sensory or

mental capabilities or lack of experi-

ence and knowledge if they are

supervised or have been given in-

structions on how to use the tool

safely and understand the hazards

involved.

Do not allow children to play with

the device.

Children are not allowed to clean or

carry out maintenance work on the

device without supervision.

Do not overload your tools.

Your work results and safety will be

enhanced if you operate the tool

within the specified output range.

Do not carry the tool by the power

cord. Do not unplug the tool by

pulling on the power cord. Protect

the power cord from heat, oil and

sharp edges.

Please read carefully and keep in a safe place.

- Under copyright. Reproduction either in whole or in part

only with our consent.

- Subject to change in the interest of technical progress.

Safety warnings

Safety warnings

GB

Puntuación

Más sobre este manual

Entendemos que es bueno tener un manual en papel para tus Steinel HG 2320 E Decapador por aire caliente. Siempre puedes descargar el manual desde nuestro sitio web e imprimirlo tú mismo. Si deseas tener un manual original te recomendamos contactar con Steinel. Es posible que puedan proporcionar un manual original. ¿Estás buscando el manual de tu Steinel HG 2320 E Decapador por aire caliente en otro idioma? Elija su idioma preferido en nuestra página de inicio y busque el número de modelo para ver si lo tenemos disponible.

Especificaciones

Todos los manuales para Steinel Decapadores por aire caliente
Más manuales de Decapadores por aire caliente

Preguntas frecuentes sobre Steinel HG 2320 E Decapador por aire caliente

Nuestro equipo de atención al cliente busca información útil sobre los productos y responde a las preguntas frecuentes. Si encuentra inexactitudes en las preguntas frecuentes, indíquenoslo usando nuestro formulario de contacto.

Productos relacionados

Manual de uso

Steinel HL 1910 E Decapador por aire caliente

Manual de uso

Steinel HL 1820 S Decapador por aire caliente

Manual de uso

Steinel HG 2120 E Decapador por aire caliente

Manual de uso

Steinel HL 1920 E Decapador por aire caliente

Manual de uso

Steinel HL 1620 S Decapador por aire caliente

Manual de uso

Steinel HL 1610 S Decapador por aire caliente

Manual de uso

Steinel HL 2020 E Decapador por aire caliente

Manual de uso

Steinel HL 2010 E Decapador por aire caliente

Categorias relacionadas